Water-cooled shrink fit machine, 15 kW, supplied with its industrial chiller, for holder bores Ø3 to Ø32 mm. It is a floor-standing unit measuring 690 × 580 × 1528 mm and weighing 115 kg. The chiller is part of the machine rather than an accessory and draws 0.75 to 1 kW in addition to the 15 kW. This makes the machine well suited to shops where shrink fitting is continuous and cooling time would otherwise delay the next tool change. Induction heating expands the holder bore, the tool is inserted, and as the holder cools it contracts uniformly around the tool shank — no collet, no nut, no wrench. Protective gloves and safety glasses are supplied, because the holder is hot when it comes off the machine.
| Cart+ | SKU | Price | Quantity | Total | Cooling | Machine Power | Chiller Power | Clamping Range | Width | Depth | Height | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MSM-WC-15G1 | $8,200 | $0 | Water | 15 kW | 0.75-1 kW | Ø3 to Ø32 mm | 690 mm (27.2 in) | 580 mm (22.8 in) | 1528 mm (60.2 in) | 115 kg (254 lb) |
Water-cooled shrink fit machine — industrial chiller included, 0.75 to 1 kW
15 kW induction shrink fit machine
Floor-standing with chiller: 690 × 580 × 1528 mm, 115 kg (254 lb)
Clamping range Ø3 to Ø32 mm — fits all our BT, CAT and HSK holders
Tool holder base and two adapters: BT/SK/CAT40 and HSK63A as standard
Angled circlip pliers and an end mill clamping ring set
Protective gloves and glasses, power cord and the operating instructions
Electrical configuration and adapter choice confirmed before shipping
Other tapers on request; additional adapters sold separately
