Carbide ball nose end mill in 11 cutting diameters from 1mm to 12mm, every size 2 flute, held within ±0.003mm. The R number in the model code is the ball radius, not the diameter — a BEM-R3.0 cuts a 6mm ball — which is where most wrong orders start. Shanks are 4, 6, 8, 10 and 12mm; overall lengths 50, 60, 75 and 100mm, with the 2, 3, 6, 8 and 10mm diameters also stocked long for deep cavities. Solid tungsten carbide with a nano coating, so it stays sharp in steel up to 62 HRC and in mold work. Metric sizes are stock; imperial on request.
| Cart+ | SKU | Price | Quantity | Total | Cutting D | Cutting L | Shank D | Total L |
|---|---|---|---|---|---|---|---|---|
BEM-R0.5-2L-2F-4D-50L | $50 | $0 | 1 mm | 2 mm | 4 mm | 50 mm | ||
BEM-R0.75-3L-2F-4D-50L | $50 | $0 | 1.5 mm | 3 mm | 4 mm | 50 mm | ||
BEM-R1.0-4L-2F-4D-50L | $50 | $0 | 2 mm | 4 mm | 4 mm | 50 mm | ||
BEM-R1.25-5L-2F-4D-50L | $50 | $0 | 2.5 mm | 5 mm | 4 mm | 50 mm | ||
BEM-R1.5-6L-2F-4D-50L | $50 | $0 | 3 mm | 6 mm | 4 mm | 50 mm | ||
BEM-R2.0-8L-2F-4D-50L | $50 | $0 | 4 mm | 8 mm | 4 mm | 50 mm | ||
BEM-R2.5-10L-2F-6D-50L | $77 | $0 | 5 mm | 10 mm | 6 mm | 50 mm | ||
BEM-R3.0-12L-2F-6D-50L | $77 | $0 | 6 mm | 12 mm | 6 mm | 50 mm | ||
BEM-R4.0-16L-2F-8D-60L | $133 | $0 | 8 mm | 16 mm | 8 mm | 60 mm | ||
BEM-R5.0-20L-2F-10D-75L | $212 | $0 | 10 mm | 20 mm | 10 mm | 75 mm | ||
BEM-R1.0-4L-2F-4D-75L | $60 | $0 | 2 mm | 4 mm | 4 mm | 75 mm | ||
BEM-R1.5-6L-2F-4D-75L | $60 | $0 | 3 mm | 6 mm | 4 mm | 75 mm | ||
BEM-R3.0-12L-2F-6D-75L | $92 | $0 | 6 mm | 12 mm | 6 mm | 75 mm | ||
BEM-R3.0-12L-2F-6D-100L | $106 | $0 | 6 mm | 12 mm | 6 mm | 100 mm | ||
BEM-R4.0-16L-2F-8D-75L | $151 | $0 | 8 mm | 16 mm | 8 mm | 75 mm | ||
BEM-R4.0-16L-2F-8D-100L | $185 | $0 | 8 mm | 16 mm | 8 mm | 100 mm | ||
BEM-R5.0-20L-2F-10D-100L | $281 | $0 | 10 mm | 20 mm | 10 mm | 100 mm | ||
BEM-R6.0-24L-2F-12D-100L | $379 | $0 | 12 mm | 24 mm | 12 mm | 100 mm |
2 flute geometry on all 18 stocked sizes
Eleven cutting diameters, 1 to 12mm
Ball radius is half the cutting diameter (BEM-R3.0 = 6mm)
Cutting length is twice the diameter; overall 50-100mm
Mid-range diameters also stocked long
Solid tungsten carbide, nano coated, within ±0.003mm
Ball nose vs flat end mill: a full radius tip; also called a ball nose cutter
For 3D contouring, mold surfacing and finishing steel to 62 HRC
Metric stocked; imperial and other flutes to order
Language
