HSK power milling chuck for C-type collets, clamping 3 to 42mm, on HSK50A, HSK63A and HSK100A shanks to DIN 69893. The C is the collet system, not an HSK-C taper — every shank in this series is HSK-A. Each collet sets its own range, from C20 at 3-20mm to C42 at 3-42mm, with C25 and C32 in between. A power milling chuck grips on a long parallel bore rather than a short cone, and that long engagement is what suits it to high-torque, heavy roughing cuts. Projection runs 95mm to 300mm; the longest bodies are C32 and C42 on HSK100A. C-type collets are ordered separately, and sizes and lengths are in the chart below.
| Cart+ | SKU | Price | Quantity | Total | L | L1 | L2 | L3 | D | d1 | d2 | Collet | Clamping Range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HSK50A-C20-120 | $129 | $0 | 145 | 120 | 94 | 26 | 50 | 58 | 20 | C20 | 3-20 mm | ||
HSK50A-C25-120 | $129 | $0 | 145 | 120 | 94 | 26 | 50 | 63 | 25 | C25 | 3-25 mm | ||
HSK63A-C20-95 | $145 | $0 | 127 | 95 | 69 | 26 | 63 | 58 | 20 | C20 | 3-20 mm | ||
HSK63A-C20-110 | $155 | $0 | 142 | 110 | 84 | 26 | 63 | 58 | 20 | C20 | 3-20 mm | ||
HSK63A-C25-100 | $148 | $0 | 132 | 100 | 74 | 26 | 63 | 63 | 25 | C25 | 3-25 mm | ||
HSK63A-C25-130 | $167 | $0 | 162 | 130 | 104 | 26 | 63 | 63 | 25 | C25 | 3-25 mm | ||
HSK63A-C32-110 | $155 | $0 | 142 | 110 | 108 | 26 | 63 | 73 | 32 | C32 | 3-32 mm | ||
HSK63A-C32-130 | $167 | $0 | 162 | 130 | 104 | 26 | 63 | 73 | 32 | C32 | 3-32 mm | ||
HSK63A-C32-150 | $180 | $0 | 182 | 150 | 124 | 26 | 63 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C20-100 | $203 | $0 | 150 | 100 | 71 | 29 | 100 | 58 | 20 | C20 | 3-20 mm | ||
HSK100A-C20-110 | $213 | $0 | 160 | 110 | 81 | 29 | 100 | 58 | 20 | C20 | 3-20 mm | ||
HSK100A-C20-130 | $234 | $0 | 180 | 130 | 101 | 29 | 100 | 58 | 20 | C20 | 3-20 mm | ||
HSK100A-C25-100 | $203 | $0 | 150 | 100 | 71 | 29 | 100 | 63 | 25 | C25 | 3-25 mm | ||
HSK100A-C25-110 | $213 | $0 | 160 | 110 | 81 | 29 | 100 | 63 | 25 | C25 | 3-25 mm | ||
HSK100A-C25-130 | $234 | $0 | 180 | 130 | 101 | 29 | 100 | 63 | 25 | C25 | 3-25 mm | ||
HSK100A-C25-160 | $264 | $0 | 210 | 160 | 131 | 29 | 100 | 63 | 25 | C25 | 3-25 mm | ||
HSK100A-C32-100 | $203 | $0 | 150 | 100 | 71 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-110 | $213 | $0 | 160 | 110 | 81 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-130 | $234 | $0 | 180 | 130 | 101 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-160 | $264 | $0 | 210 | 160 | 131 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-200 | $305 | $0 | 250 | 200 | 171 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-250 | $355 | $0 | 300 | 250 | 221 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C32-300 | $406 | $0 | 350 | 300 | 271 | 29 | 100 | 73 | 32 | C32 | 3-32 mm | ||
HSK100A-C42-110 | $213 | $0 | 160 | 110 | 81 | 29 | 100 | 88 | 42 | C42 | 3-42 mm | ||
HSK100A-C42-130 | $234 | $0 | 180 | 130 | 101 | 29 | 100 | 88 | 42 | C42 | 3-42 mm | ||
HSK100A-C42-160 | $264 | $0 | 210 | 160 | 131 | 29 | 100 | 88 | 42 | C42 | 3-42 mm | ||
HSK100A-C42-200 | $305 | $0 | 250 | 200 | 171 | 29 | 100 | 88 | 42 | C42 | 3-42 mm | ||
HSK100A-C42-250 | $355 | $0 | 300 | 250 | 221 | 29 | 100 | 88 | 42 | C42 | 3-42 mm | ||
HSK100A-C42-300 | $406 | $0 | 350 | 300 | 271 | 29 | 100 | 88 | 42 | C42 | 3-42 mm |
HSK-A taper tool holder shank to DIN 69893
HSK50A, HSK63A and HSK100A
C-type collets C20, C25, C32 and C42
Clamping range 3mm up to 42mm
Projection 95mm to 300mm, 29 configurations
The C is the collet system, not an HSK-C taper
Long parallel-bore grip for heavy roughing
C-type collets ordered separately
Language
